Zak Enamel Hardener (Part B)
Zak Hardener (Part B) is the mixing/pairing agent to use with our Zak Enamels range.
Steps For Use:
- Measure equal volume (1:1) of your Zak Enamel (Part A) color of choice with the Zak Hardener (Part B, sold separately) into two measuring cups.
- Once measured correctly, combine in a separate container.
- Slowly mix in one direction until completely combined without excess not stirred in for 3-5 minutes.
- After this is completed, let the mixture sit for another 5 minutes until all bubbles disappear.
- Slowly pour mixture into the mold of choice – IF – bubbles appear after 5-10 minutes after pouring, remove them with a heat gun. Curing temperature should be room temperature (ideally the best temperature is 77 degrees).
- Wait 24 hours to fully cure before removing from mold.
